Posted on Leave a comment

Test S 100 (Singani Pharma)

I just got the suspension in. I ran it under hot water for about three minutes I still was only able to drawl about .6 ML`s in the syringe, I guess I will try to let it heat up a little longer. Has anybody use this particular suspension and the amps?
Answers:
0
JamesEarl User profile Expert

I suggest you heat it longer under more hot water and here`s what might help, shake it for a minute or even two nice and hard. It never happened to me however and I drew it out with a tiny insulin needle without an issue, but I did shake it long and hard. Good luck!
0
nickname_238 User profile

Water based compounds are sensitive they tend to crash every now and then. Get a pan and add enough water but don’t submerge the vile under the water, let the water get warm not hot! Give it 10 minuets .Also It wouldn’t hurt to ask 24roids if there is anything thing they could do. Good luck. Take care.
1
crazy Dan User profile Expert

It doesn`t matter which brand test suspension you are using, they are all the same as far as drawing goes. I have test suspension from Dragon and GP, and they both takes forever to draw up! At least it`s not as bad as winstrol for injection. Use a larger needle like a 20g needle to draw and a 23g to pin. That`s what i did and it`s works! Drawing takes a while so just be patience. Pinning goes much faster but don`t go too fast because it will sting. As for putting it in warm water or heating it up to go in solution it`s not going to work. The precipitates will not dissolve. Good luck buddy! Don`t forget to vote.
1
BigDaddy123 User profile

Might want to put a different gage on while drawing up, 18G I haven`t had any issues and pinning with 23G. Since you have amples, watch out for glass shards when drawing, they make needles with filters.
0
nickname_311 User profile Expert

Some people have recently but that was when it is cold out though I would submit a ticket to 24roids help see what they can do about
—————————————————–
Whenever I place the test suspension from singani it only puts one not 5 In the number area than you get a free one aswell that comes up
Answers:
0
tworotten4u User profile

Arthur you might need to use the drop box for quantity. The free one automatically show up when you place your order.
0
Gearpeace User profile Expert

Sometimes when choosing the 5 or 10 items option it`ll just say 1 in your cart. Verify that the price is correct for 5. It should be if they`re adding the free one…..otherwise it wouldn`t appear in your cart.
0
Unc33135 User profile

When you put it in the cart it says 1 but if you look above it says 5x with the free one on a seperate line. This happens for many products i order. For instance when i order 30 amps from alpha it says 1 in the cart but says times 30 above it.
0
crazy Dan User profile Expert

I just did it and it`s fine. On testS 100 screen, click on circle onPack of 5. Then click add to Cart. In Cart screen it has 2 line items. one is for 5 testS 100 at $144.Another line item below with 1 testS 100 wth no price. hope that helps!
—————————————————–
How do I use this cloudy liquid? This is not like any other testosterone I`ve used before (I got this as a free item). Do I draw it in the syringe like I would any other test product?
Answers:
0
MegaCycle User profile

Yes, if it`s cloudy, I would heat it up in very hot water for a few minutes. It will normally clear up and be fine.
0
nickname_311 User profile Expert

What she said above.
0
JD Cycle User profile Expert

Yes. It`s just suspension wifh is water based and fast acting. Warm it a little if it`s crystalized. May want to research test suspension before you start though. If yours is waterbased, you won`t want to mix with oilbased.
0
BABA User profile

If you want to make sure that it`s normal then simply contact 24roids and they will verify that this product is in fact supposed to look a certain way.
0
Pookie User profile

Draw and shoot. Why are you using suspension? It has a super short half life. Are you competing or something?
0
S-C-J User profile

Unlike peptides, you can shake this viguously to mix, then draw and inject like normal. Also ok to mix with oils.

Leave a Reply

Your email address will not be published. Required fields are marked *