hey, can i use the same needle to draw and to inject. i mean do i need to switch to another needle or what?
Answers:
skitt
Yes I would switch…. Needles are very scarp and anytime you are putting a needle into a vial it makes it dull.. so a fresh needle will have maximum sharpness making it easier to penetrate the skin
Veronica Blekis
Yes. But if your drawing from a 10ml bottle the rubber stopper tends to dull the needle point, possibly making the injection painful. It’s also quicker and easier to draw the liquid, especially oil an base like Testosterone, with a larger gauge like an 18, then swap out the needle to a 22 gauge to inject with. But if your using one needle for both, be sure to use an alcohol swab to clean the rubber stopper prior to drawing the liquid out.
ViktorN
Absolutely my friend! I used to draw and pin with one needle. And I stack EQ and restE. I used 23g. Now I use 25g with 1.5” needle. But I draw with 22g due to several gears in one syringe. I switch needle because it do get a little dull but honestly sometime you don’t feel a thing! In short yes you can use one needle. That said place close attention to aseptic techniques. Good luck my friend!
D-man
You don`t have to it is just more convenient. It takes longer to draw with the smaller needle that you would inject with. I also feel that a fresh needle to inject would be sharper and more sterile. Needles are super cheap and easy to get. I`m not sure why you wouldn`t want to.
Frazier
Yes you can use the same needle
nickname_610
I withdraw with one needle which more thicker and then I switch to another needle which thinner to inject. So it’s less painful because needle stay sharper.
———————————————–
what size needle and syringe should I get to inject 1 cc of testosterone cypionate?
Answers:
Noah Shaw
22 gauge and make sure u use a bigger needle to draw it from your vial or it`s going to take awhile to draw it, also make sure ur 22g is 11/2 long
Jay
25 gauge 1.5″ needle is will do the job, you can use a bigger needle to draw if the oil is too thick and change the needle back to 25g
Socaljuicer
This comes down to personal preference to some degree, but for most people 25 gauge x 1 inch needles are perfect for both drawing and injecting. If you have a large amount of body fat in your glutes, you may need to get one and a half inch needles but this is usually not critical.
Maison Jardin
I use 1in 25gauge it gives you less pip after injection why go with a bigger needle if you don’t have to.
nick
The standard for most oils is 25g 1-1.5″ needle but if your carrier oil is thin like GP`s you can actually draw and pin using insulin needle
ROBERT BERG
I use 23 gauge 1 1/2″ for glute injection
———————————————–
What size needle should I get for mixing the b.water into the hgh vial?
Answers:
evan johnson
You could use any needle that will draw up the liquid really. However, you probably want to use the insulin syringe you are probably using for HGH injections as it is easy to measure out 1ml of bacteriostatic water.
Maison Jardin
You can You the same needle that you Prefer injecting with to mix the Bac Water into the hgh.
Anonymousone
I usually use 28gauge 1/2 in 1cc
Nathan Co
Any needle will work, but before you reconstitute, make sure there is no vacuum in the vial. To do this, fill a syringe with air and poke the needle in the vial. If there is a vacuum, it will suck the air from the syringe. This will help you from splashing the peptide with water that could break down the fragile molecules. Always drop the water down the side of the vial slowly, not directly on the “puck” or solid
mchilds
I use large needles 20-18G but smaller syringes like 1cc so I can get exact measurements. But you can use a 28G if you want, just going to take an extra minute or two.
Dan J
You could use insulin needle, it doesn`t matter. Bac water is water, it`s not thick like carrier oils. You can use whatever you wish, from 18G to 31 G.